Home» Calibration Services» Dimension Calibrations
Dimension Calibrations
Dimension calibration ensures that the linear measurement of a device or measuring tool align accurately with a recognized standard, allowing for reliable and precise measurements in various applications. This is also required stable environmental condition for accurate result which is acceptable worldwide.
We provide services for various instruments, including but not limited to:
- Bore Gauge
- Cube Mould
- Depth Micrometer
- Dial Indicator (Lever)
- Dial Thickness Gauge, Inside/Outside Dial Caliper, Pistol Caliper
- Digimatic Depth Gauge, (Least count : 0.01 mm)
- Digital / Dial Indicator (Plunger)
- Elongation Gauge
- External Micrometer
- Feeler Gauge, Leaf, Thickness Foils
- Flakiness Gauge
- Height Gauge
- lnside Micrometer
- Measuring Tape, Pie Tape, Scale
- Pin Gauge, Thread Measuring Wire
- Plain plug Gauge, Height Master Gauge, Width Gauge
- Plain Ring Gauge
- Thread Ring Gauge
- Protactor (Least Count 1°)
- Radius Gauge / Radius Template
- Sieves
- Snap Gauge, Gap Gauge
- Taper scale
- Thread Pitch Gauge (Distance between pitch to pitch)
- Thread Plug Gauge
- Vernier Caliper (Dial, Digital)
- Weld Gauge, Scale Depth
- Wire gauge
- Dial Calibration Tester
- Master Rod/Length Bar/Extension Rod
- Centering Device
- Slip Gauge Set
- Viscosity Cup/ Ford Cup
- Ultra Sonic Thickness Gauge
- Profile Projector
- Engineers Square/ Angle Plate/ Right angle
Scope of Services:
| Instruments | Range | Method for calibration |
|---|---|---|
| Bore Gauge (Least count : 0.001 mm) transmission only | 0 - 1 mm | Using LMM , Electronic Dial Calibration Tester by comparison method |
| Cube Mould | 50 mm - 150 mm | Using Vernier Caliper/ Profile Projector by Comparison Method |
| Depth Micrometer (Least count : 0.01 mm) | 0 - 200 mm | Using Slip Gauge Set by comparison method |
| Dial Indicator (Lever) Least count : 0.001 mm | 0 - 0.8 mm | Using Electronic Dial Calibration Tester by comparison method |
| Dial Thickness Gauge, Inside/Outside Dial Caliper, Pistol Caliper (Least count : 0.01 mm) | 0 - 100 mm | Using Slip Gauge Set by comparison method |
| Digimatic Depth Gauge, (Least count : 0.01 mm) | 0 - 200 mm | Using Slip Gauge Set by comparison method |
| Digital / Dial Indicator (Plunger) Least count : 0.001 mm/ 0.01 mm | 0 - 50 mm | Using Electronic Dial Calibration Tester/ ULM by comparison method |
| Elongation Gauge | 6.3 mm - 63 mm | Using ULM by comparison method |
| External Micrometer, Drum Micrometer, Point Micrometer (Least count : 0.001 mm/ 0.01 mm) | 0 - 100 mm | Using Slip Gauge Set by comparison method |
| Feeler Gauge, Leaf, Thickness Foils | 0.01 mm - 2 mm | Using ULM by comparison method |
| Flakiness Gauge | 6.3 mm - 63 mm | By using Profile Projector by Comparison Method |
| Height Gauge (Least count 0.01 mm) | 0 - 1000 mm | Using Slip gauge/ Caliper Checker by comparison method |
| lnside Micrometer (Least count 0.01 mm) | 0 - 300 mm | Using LMM by comparison method |
| Measuring Tape, Pie Tape, Scale (L.C: 0.5mm/ 1 mm) | 0 - 1000 mm | Using Measuring Scale Tape Calibrator by comparison method |
| Pin Gauge, Thread Measuring Wire | 0.1 mm - 25 mm | Using LMM by comparison method |
| Plain plug Gauge, Height Master Gauge, Width Gauge | 1 mm - 150 mm | Using LMM by comparison method |
| Plain Ring Gauge | 3 mm - 225 mm | Using LMM by comparison method |
| Protactor (Least Count 1°) | 0 ° - 360 ° | By using Profile Projector by Comparison Method |
| Radius Gauge / Radius Template | 0 - 25 mm | By using Profile Projector by Comparison Method |
| Sieves | 32 μm - 5 mm | By using Profile Projector by Comparison Method |
| Snap Gauge, Gap Gauge | 1 mm - 250 mm | Using LMM by comparison method |
| Taper scale (Least Count 0.1 mm) | 0.4 mm - 200 mm | By using Profile Projector by Comparison Method |
| Thread Pitch gauge (Distance between pitch to pitch ) | 0.25 mm - 25 mm | Using Profile Projector by comparison method |
| Thread Plug Gauge (Taper NPT), Effective Diameter (Pitch Diameter) | 3 mm - 100 mm | Using LMM by comparison method |
| Thread Plug Gauge - Effective Diameter (Pitch Diameter) | 3 mm - 100 mm | Using LMM by comparison method |
| Thread Ring Gauge (Taper NPT), Effective Diameter (Pitch Diameter) | 4 mm - 100 mm | Using LMM by comparison method |
| Thread Ring Gauge - Effective Diameter (Pitch Diameter) | 4 mm to 25 mm | Using LMM by comparison method |
| Thread Ring Gauge - Effective Diameter (Inside Diameter) | 25 mm to 100 mm | Using LMM by comparison method |
| Vernier Caliper (Dial, Digital) (Least count : 0.01 mm) | 0 - 1000 mm | Using Slip Gauge Set/ Caliper Checker by comparison method |
| Weld Gauge, Scale Depth (Least Count : 1 mm) | 1 mm - 50 mm | Using Profile Projector by comparison method |
| Wire gauge (Linear) | 0.025 mm - 10 mm | Using Profile Projector by comparison method |
| Dial Calibration Tester (Least count : 0.001 mm) | 0 - 25 mm | Using Electronic Probe (L.C. 0.0001 mm) by comparison method. |
| Master Rod/Length Bar/Extension Rod | 25 mm - 300 mm | Using LMM and Slip gauge by comparison method |
| Centering Device | 0 -300 mm | Using Vernier Caliper by direct method |
| Slip Gauge Set | 0.5 mm - 100 mm | Using Electronic Probe/ Slip Gauge set by comparison method. |
| Viscosity Cup/ Ford Cup | 0- 300 mm | Using Vernier Caliper by direct method |
| Ultra Sonic Thickness Gauge | 0-2 mm | Using Slip Gauge Set by comparison method |
| Profile Projector | 0- 100 mm | Using Slip Gauge Set/ Glass scale by comparison method |
| Engineers Square/ Angle Plate/ Right angle | 0 - 180° | Using Slip Gauge Set by comparison method |